Solar pond filter with pump FA001 – 3000 mAh battery, flow rate 300 l/h, 8 nozzles, 6.5 W panel

Biling Solar Pond Filter with Pump – 6.5W Panel, 3000mAh Battery, 300 l/h Flow, 8 Water Effects

The Biling solar pond filter is a compact and affordable solution for smaller garden ponds, mini-ponds, fountains, birdbaths, and outdoor water features. It combines filtration, water circulation, and a decorative fountain in one device without the need for a mains connection.

A 6.5W solar panel powers the pump with a maximum flow rate of up to 300 l/h. The integrated 3000 mAh battery stores a portion of the energy captured to help maintain more stable operation during transient cloud cover throughout the day. Eight water effect variants and the included hose allow you to create a fountain, a gentle spray, or a small water feature.

Compact filter for small ponds and fountains

Thanks to the small dimensions of the filter box, the model is especially suitable where a standard pond filter would be unnecessarily large. It is ideal for smaller preformed ponds, balcony and terrace basins, birdbaths, or garden fountains.

The filter box helps capture coarse impurities before water enters the pump. At the same time, the porous filter media provides a surface for the natural colonization of microorganisms. Water movement reduces the formation of stagnant areas and promotes gas exchange at the water surface.

This is a compact auxiliary filtration system. It does not replace a properly dimensioned main filtration system for heavily polluted ponds or tanks with a large number of fish.

Main advantages

• 10 V / 6.5 W solar panel
• Built-in 3000 mAh battery
• Maximum water flow up to 300 l/h
• Compact filter box for smaller water features
• Filter media and sponge to protect the pump inlet
• Eight decorative water effect variants
• Transparent hose for creating your own water feature
• Dry-run pump protection
• LED operational status indicator
• Three-meter cable between the panel and the pump
• Operates without mains connection
• Simple assembly and easy access for cleaning

Solar operation with battery support

The panel converts solar radiation into the energy required for pump operation. The built-in battery stores some energy and helps bridge transient cloud cover or short-term fluctuations in sunlight intensity.

The manufacturer specifies auxiliary operation on stored energy for up to approximately 2–3 hours. The actual time depends on the battery charge level, the intensity of previous sunlight, the selected nozzle, pump head, and filter cleanliness.

The battery is primarily intended to stabilize operation during the day. After sunset, the device turns off automatically and is not intended for nighttime operation.

Before first use or after long-term storage, we recommend letting the panel charge in direct sunlight for approximately 4–6 hours.

Flow rate up to 300 liters per hour

Under optimal conditions, the submersible pump achieves a maximum flow of up to 300 l/h. The flow helps keep the water moving, reduces stagnation, and ensures water passes through the filter box.

Actual performance may be lower depending on:

• sunlight intensity,
• battery charge level,
• clogging of the filter or nozzle,
• selected water effect,
• hose length and elevation,
• orientation and cleanliness of the solar panel.

Eight water effects or hose connection

A set of interchangeable attachments allows you to create eight different water stream patterns – from a narrow jet to a wider decorative spray. The height and shape of the stream can be adjusted by selecting the appropriate combination of attachments.

Instead of the fountain nozzle, you can connect the transparent hose to the pump to divert water to a small waterfall, cascade, or other garden water feature.

The fountain nozzle and hose represent two alternative ways of use and cannot be used simultaneously.

Proper depth and filter placement

For proper operation, place the filter box horizontally on a firm bottom and submerge it completely under the water surface. Assemble the fountain nozzle using the extension parts so that its head remains above water – ideally about 2–4 cm above the highest expected water level.

The recommended water depth at the box location is 7–12 cm; the minimum depth is 7 cm. When using all extension parts, approximately 13–14 cm can be considered an indicative upper limit, though specific possibilities depend on the chosen nozzle type and water level fluctuations.

In a deeper pond, place the filter box on a stable, waterproof platform so that it remains fully submerged while the nozzle head is safely above the surface. Do not hang the box by the cable or the tube. Always keep the solar panel and electrical connectors in a dry place, away from the water.

Dry-run protection

A water sensor detects low water levels and helps protect the pump from dry running. A blue indicator light signals that the power is on. A red indicator light may warn of a low water level or insufficient sunlight.

The protection serves as a safeguard. The filter box with the pump must remain sufficiently submerged during normal operation.

For what water features is the filter suitable?

The manufacturer specifies use for water features with a volume of approximately 100–600 liters. It is best suited for:

• ornamental mini-ponds,
• smaller garden ponds,
• small tanks with aquatic plants,
• garden and tabletop fountains,
• birdbaths,
• smaller outdoor fish tanks,
• small waterfalls and cascades,
• balcony and terrace water features.

The upper limit of the range is suitable primarily for lightly loaded decorative tanks. For ponds with fish, a larger amount of organic waste, or frequent algae growth, we recommend choosing the lower end of the range, performing more frequent maintenance, or using a more powerful filter.

Simple installation

1. Check the filter media and ensure the pump is seated correctly in the filter box.
2. Securely close the filter box lid.
3. Assemble the chosen fountain nozzle or connect the hose.
4. Place the filter box into the water. The minimum recommended depth is 7 cm.
5. Verify that the pump is submerged and the fountain nozzle outlet remains above the water surface.
6. Place the solar panel in a stable, unshaded location.
7. In the Czech Republic, ideally orient the panel towards the south at an angle of approximately 15–30°.
8. Connect the pump to the solar panel and keep the connector dry.
9. In a deeper tank, the filter can be stably placed on a flat stone, pedestal, or underwater shelf so that the nozzle reaches above the surface.

Cleaning and maintenance

To maintain flow, we recommend checking the following at least once a week:

• filter box inlet openings,
• filter media,
• pump filter sponge,
• pump inlet and impeller,
• obstructions in the selected nozzle or hose.

Clean nozzle openings as needed, usually once every 2–4 weeks. Wipe the surface of the solar panel approximately once a month with a soft, damp cloth.

Before winter, remove the device from the water, clean thoroughly, dry, and store in a dry, frost-free location.

Package contents

• 10 V / 6.5 W solar panel with built-in battery,
• rear support and ground stake for the solar panel,
• compact filter box,
• pre-installed submersible pump,
• porous filter media,
• pump filter sponge,
• set of attachments for eight water effects,
• nozzle extension and connection parts,
• transparent hose,
• 3 m connection cable,
• user manual.

Technical parameters

Important warnings

• Never intentionally run the pump dry.
• The filter box must be sufficiently submerged during operation.
• The fountain nozzle must remain above the water surface.
• Keep electrical connectors dry.
• Do not disassemble the solar panel or battery.
• The device is not intended for the treatment of drinking water.
• Do not use in salt water or water with aggressive chemical agents.
• Performance depends on sunlight intensity and filter condition.
• The device is not intended for medium or large ponds, nor as the sole filtration for heavily loaded fish tanks.
• Protect the device from frost.

Frequently Asked Questions

Does the filter work on cloudy days?

Yes, the built-in battery helps bridge transient cloud cover during the day. Performance and operating time, however, depend on the amount of stored energy.

Does the filter work at night?

No. The device turns off after sunset. The battery is primarily intended to stabilize daytime operation.

How long can it run on battery?

The manufacturer states up to approximately 2–3 hours. Real-world duration depends on the charge, the intensity of previous sunlight, and the pump load.

Is it suitable for a pond with fish?

Yes, especially for smaller and less loaded tanks. For a higher number of fish, we recommend more frequent cleaning and more powerful main filtration.

Does the filter remove algae?

The filter captures some solid waste and promotes water circulation, but it does not remove all algae on its own, nor does it address the underlying causes of their growth.

Can the fountain and the hose be used simultaneously?

No. The nozzle and hose are two alternative ways of water output.

What does the red light mean?

It may signal an insufficient water level or sunlight that is too weak.

What to do if flow is weak?

Check the sunlight exposure of the panel, battery charge level, cleanliness of the filter media, pump inlet, impeller, nozzle, and for any kinks in the hose.

10 V / 6.5 W solar panel with built-in battery,
rear support and ground stake for solar panel,
compact filter box,
pre-installed submersible pump,
porous filter medium,
pump filter sponge,
set of attachments for eight water effects,
nozzle extension and connecting parts,
transparent hose,
3 m connection cable,
user manual.

Shipping policy

All orders are processed within 1 business day (excluding weekends and holidays) after receiving your order confirmation email. You will receive another notification when your order has shipped. This e-mail also includes a tracking number that you can use to track your shipment. 

We offer a FREE SHIPPING to the selected European (EU, EEA) countries for orders above 40 EUR. Shipping cost for orders below 40 EUR is from 4 EUR, depending on the destination country. 

Please see the list below for countries that qualify for free shipping:

• Austria
• Belgium 
• Bulgaria
  
• Croatia
• Czech Republic
• Denmark
• France
• Germany
• Greece
• Hungary
• Italy
• Lithuania
• Malta
• Poland
• Romania
• Spain
• Slovakia
• Slovenia

United Kingdom (UK) - Free delivery for orders not exceeding 135 GBP. 

The SHIPPING TIME to the above countries is 2 to 4 business days. 

International Shipping

We offer international shipping to the following countries: 

• All other European countries that are not listed above. 
• The international shipping cost will be available to you at checkout. 

- Finland (€20.00 EUR), Ireland (€10.00, 4.00 EUR), Liechtenstein (CHF 15.00), Luxembourg (€12.00 EUR), Netherlands (€8.00 EUR), Norway (€20.00 EUR), Serbia (RSD 500.00), Sweden (kr 169.00 SEK), Switzerland (CHF 15.00), United Arab Emirates (AED 50.00), United Kingdom (£4.00 GBP), Ukraine (₴100.00 UAH), 

* Orders within the United Kingdom (UK) that exceed £135 GBP may be subject to local tax. 

*At this time, we do not ship to Asia, Africa, Canada and to the US. 

Shipping to P.O. boxes / Pick-up points

We do offer shipping to P.O. boxes and pick-up points in selected countries in Europe. 

How do I check the status of my order?

When your order has shipped, you will receive an email notification from us which will include a tracking number you can use to check its status. Please allow 48 hours for the tracking information to become available.

If you haven’t received your order within 10 days of receiving your shipping confirmation email, please contact us at support@fapiere.com with your name and order number, and we will look into it for you.

You will be able to track your order using the link provided in your shipping confirmation email. 

Refunds, returns, and exchanges