Pond and aquarium aerator AP008s – 3600 mAh battery, 3 operating modes, air flow 1 l/min
- Delivery in 2 - 3 business days
- Free returns within 30 days
- Payment on delivery
- In stock, ready to ship
The rechargeable Fapiere AP008s aerator helps increase oxygen levels in water for aquariums, smaller garden ponds, and fish tanks. An integrated 3600 mAh battery enables operation without a permanent connection to the electrical grid, while power supply and charging via 5 V / 1 A USB make it easy to use at home or on the go.
The device offers three operating modes. The LOW mode is suitable for longer, more energy-efficient operation, the HIGH mode provides a more intense airflow with a maximum output of up to 1 l/min, and the CYCLE mode alternates between 10 seconds of operation and 10 seconds of pause. Regular stopping of the pump in cycle mode is a normal part of its operation, not a malfunction.
In continuous LOW and HIGH modes, the aerator can run for approximately 24 to 48 hours on a single charge, depending on the selected power, battery status, and operating conditions. The CYCLE mode limits the actual running time of the pump and can conserve the battery; the manufacturer does not specify a separate runtime for this mode.
The compact design allows for easy transport and use with aquariums, smaller ponds, fish containers, or during fish transport. The built-in battery can also serve as a backup aeration source during temporary power outages.
Main benefits
- Integrated rechargeable 3600 mAh battery
- Operation without a permanent connection to the electrical grid
- Power supply and charging via 5 V / 1 A USB
- Three operating modes – LOW, HIGH, and CYCLE
- Intermittent cycle: 10 seconds on / 10 seconds off
- Maximum airflow up to 1 l/min
- Operation in LOW/HIGH modes for approximately 24–48 hours depending on power settings
- Low pump power consumption of 0.5 W
- Compact and portable design
- Suitable for aquariums, smaller ponds, and fish tanks
- Practical as a backup aerator during power outages
Three operating modes
Low power – LOW
An energy-saving mode with lower aeration intensity designed for longer continuous operation. It is particularly suitable for smaller aquariums, water containers, or situations where longer battery life is important.
The manufacturer does not specify the exact airflow in the low mode.
High power – HIGH
A more powerful mode provides a more intense stream of bubbles and is suitable for situations where it is necessary to increase oxygen supply in the water.
- Maximum airflow: up to 1 l/min
- Higher aeration performance
- Shorter operating time than in the low mode
Intermittent mode – CYCLE
In the cycle mode, the pump regularly alternates between turning on and off:
- 10 seconds on
- 10 seconds off
- automatic cycle repetition
This mode is suitable for periodic and more energy-efficient aeration. Regular ten-second pauses are a normal function of the device. The manufacturer does not specify the exact battery life in the CYCLE mode.
Integrated 3600 mAh battery
The built-in lithium-ion battery allows you to use the aerator without a permanent connection to a power cord. The device can thus be easily moved between an aquarium, pond, or fish tank.
The battery is also practical during short-term power outages, when it helps maintain the air supply to the water.
Powering and charging via USB
The aerator is powered or charged via a USB connection with 5 V / 1 A parameters. A compatible USB power adapter matching the required parameters can be used for charging. The device can also aerate while connected to a suitable USB source.
We recommend fully charging the battery before first use.
Suitable applications
The AP008s aerator can be used especially for:
- freshwater aquariums
- smaller garden ponds
- quarantine tanks
- fish containers
- temporary tanks
- live fish transport
- fishing
- backup aeration during power outages
The device is intended primarily for smaller water areas and tanks. The actual aeration efficiency depends on the volume and depth of the water, temperature, number of fish, length of the tubing, and the resistance of the air stones used.
Simple use
- Charge the aerator using a compatible 5 V / 1 A USB source.
- Connect the splitter, both air hoses, and the air stones.
- Place the air stones in the water.
- Keep the aerator unit itself out of the water in a dry and stable place.
- Turn on the device and select the LOW, HIGH, or CYCLE mode by pressing the button repeatedly.
- Check if bubbles are emerging from the air stones. In CYCLE mode, operation is regularly interrupted for 10 seconds.
Important recommendations
- Do not submerge the aerator unit itself in water.
- Only the hoses and air stones belong in the water.
- Protect the unit from constant rain, immersion, and excessive moisture.
- Use only power supply matching the 5 V / 1 A values.
- Do not cover the air intakes or outlets.
- Route the hoses so they are not kinked or pinched.
- To limit backflow of water, place the unit above the water level or use check valves.
- Battery life may vary depending on the mode, battery age, temperature, and operating load.
- If the amount of bubbles decreases, check the hoses and clean or replace the air stones.
- In CYCLE mode, the regular ten-second pause is normal and does not indicate a malfunction.
Technical parameters
- Brand: Fapiere
- Model: AP008s
- Product type: rechargeable pond and aquarium aerator
- Power supply and charging: USB 5 V / 1 A
- Battery capacity: 3600 mAh
- Battery voltage: 3.7 V
- Battery type: 18650 lithium-ion battery
- Pump power: 0.5 W
- Pump type: brushless DC air pump
- Maximum airflow: up to 1 l/min
- Number of air outlets: 2
- Number of operating modes: 3
- Modes: LOW / HIGH / CYCLE
- Intermittent mode: 10 seconds on / 10 seconds off
- Flow rate in low mode: approx. 0.5 l/min
- Flow rate in high mode: up to 1 l/min
- Battery life: LOW/HIGH approx. 24–48 hours depending on selected mode and conditions; manufacturer does not specify a separate value for CYCLE
- Noise level: less than 60 dB
- Protection rating: IP64
- Unit dimensions: 15.3 × 14.5 × 8.2 cm
- Color: black
- Material: ABS plastic
- Recommended pond size: approx. up to 1–3 m³
- Use: aquariums, smaller garden ponds, fish tanks, quarantine tanks, fish transport, and emergency aeration
Shipping policy
All orders are processed within 1 business day (excluding weekends and holidays) after receiving your order confirmation email. You will receive another notification when your order has shipped. This e-mail also includes a tracking number that you can use to track your shipment.
We offer a FREE SHIPPING to the selected European (EU, EEA) countries for orders above 40 EUR. Shipping cost for orders below 40 EUR is from 4 EUR, depending on the destination country.
Please see the list below for countries that qualify for free shipping:
- Austria
- Belgium
- Bulgaria
- Croatia
- Czech Republic
- Denmark
- France
- Germany
- Greece
- Hungary
- Italy
- Lithuania
- Malta
- Poland
- Romania
- Spain
- Slovakia
- Slovenia
United Kingdom (UK) - Free delivery for orders not exceeding 135 GBP.
The SHIPPING TIME to the above countries is 2 to 4 business days.
International Shipping
We offer international shipping to the following countries:
- All other European countries that are not listed above.
- The international shipping cost will be available to you at checkout.
- Finland (€20.00 EUR), Ireland (€10.00, 4.00 EUR), Liechtenstein (CHF 15.00), Luxembourg (€12.00 EUR), Netherlands (€8.00 EUR), Norway (€20.00 EUR), Serbia (RSD 500.00), Sweden (kr 169.00 SEK), Switzerland (CHF 15.00), United Arab Emirates (AED 50.00), United Kingdom (£4.00 GBP), Ukraine (₴100.00 UAH),
* Orders within the United Kingdom (UK) that exceed £135 GBP may be subject to local tax.
*At this time, we do not ship to Asia, Africa, Canada and to the US.
Shipping to P.O. boxes / Pick-up points
We do offer shipping to P.O. boxes and pick-up points in selected countries in Europe.
How do I check the status of my order?
When your order has shipped, you will receive an email notification from us which will include a tracking number you can use to check its status. Please allow 48 hours for the tracking information to become available.
If you haven’t received your order within 10 days of receiving your shipping confirmation email, please contact us at support@fapiere.com with your name and order number, and we will look into it for you.
You will be able to track your order using the link provided in your shipping confirmation email.
Refunds, returns, and exchanges
In case of any refunds, returns, and exchanges, please head over to our return policy page.
We accept returns up to 30 days after delivery, if the item is unused and in its original condition, and we will refund the full order amount minus the shipping costs for the return.
In the event that your order arrives damaged in any way, please email us as soon as possible at support@fapiere.com with your order number and a photo of the item’s condition. We address these on a case-by-case basis but will try our best to work towards a satisfactory solution.
If you have any further questions, please don't hesitate to contact us at support@fapiere.com